|
|||||
|
|
The use of Al-Al2O3 cold spray coatings to improve the surface properties of magnesium alloys |
|
| Authors: | K Spencer DM Fabijanic |
| Affiliation: | a Division of Materials, School of Engineering, The University of Queensland, St Lucia, QLD, 4072, Australia b ARC Centre of Excellence for Design in Light Metals, Australia c Centre for Material and Fibre Innovation, Deakin University, VIC, 3217, Australia |
| Abstract: | Pure Al and 6061 aluminium alloy based Al2O3 particle-reinforced composite coatings were produced on AZ91E substrates using cold spray. The strength of the coating/substrate interface in tension was found to be stronger than the coating itself. The coatings have corrosion resistance similar to that of bulk pure aluminium in both salt spray and electrochemical tests. The wear resistance of the coatings is significantly better than that of the AZ91 Mg substrate, but the significant result is that the wear rate of the coatings is several decades lower than that of various bulk Al alloys tested for comparison. The effect of post-spray heat treatment, the volume fraction of Al2O3 within the coating and of the type of Al powder used in the coatings on the corrosion and wear resistance was also discussed. |
| Keywords: | 62 20 Qp 81 40 Np 81 40 Pq 81 65 -b 81 65 Kn |
| 本文献已被 ScienceDirect 等数据库收录！ | |