| MAH原位增容PP/PA6共混体系力学性能研究 |
| |
| 引用本文： | 孙义明,谢霞,段玉情,毕小云.MAH原位增容PP/PA6共混体系力学性能研究[J].湖北工业大学学报,2011(5):1-3. |
| |
| 作者姓名： | 孙义明 谢霞 段玉情 毕小云 |
| |
| 作者单位： | 湖北工业大学化学与环境工程学院; |
| |
| 基金项目： | 武汉市2007年科技专项项目(200710321094) |
| |
| 摘 要： | 采用MAH一步法原位增容PP/PA6共混物,研究MAH和DCP的用量对PP/PA6共混物力学性能的影响,并通过与PP-g-MAH增容PP/PA6共混体系对比,发现MAH原位增容可有效提高PP/PA6共混体系的力学性能.一步法原位增容工艺简单,成本低.
|
| 关 键 词： | 相容剂 原位增容 PP/PA6共混体系 |
A Study of Mechanical Properties of PP/PA6 Blending System Situ-Compatibilized with MAH |
| |
| SUN Yi-ming,XIE Xia,DUAN Yu-qing,BI Xiao-yun.A Study of Mechanical Properties of PP/PA6 Blending System Situ-Compatibilized with MAH[J].Journal of Hubei University of Technology,2011(5):1-3. |
| |
| Authors: | SUN Yi-ming XIE Xia DUAN Yu-qing BI Xiao-yun |
| |
| Affiliation: | SUN Yi-ming,XIE Xia,DUAN Yu-qing,BI Xiao-yun(HuBei Univ.of Tech.Chemical and Environmental Engin.Professor,Wuhan 430068,China) |
| |
| Abstract: | In this paper,PP/PA6 blend was situ compatibilized with MAH.The amount influences of MAH and DCP on the mechanical properties of PP/PA6 blending system were discussed,and contrasted with the PP/PA6 blending system compatibilized with PP-g-MAH.The results show that MAH can effectively improve the mechanical properties of PP/ PA6 blending system in situ compatibilization.The producting costs can be reduced because of the simple process with MAH. |
| |
| Keywords: | compatibilizer situ compatibilization PP/PA6 blending system |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
