| 等离子熔积成形与铣削光整复合直接制造金属零件技术 |
| |
| 引用本文： | 张海鸥,熊新红,王桂兰,陈竞. 等离子熔积成形与铣削光整复合直接制造金属零件技术[J]. 中国机械工程, 2005, 16(20): 1863-1866 |
| |
| 作者姓名： | 张海鸥 熊新红 王桂兰 陈竞 |
| |
| 作者单位： | 1. 华中科技大学塑性成形模拟及模具技术国家重点实验室,武汉,430074
2. 中国南方航空动力机械有限公司,株洲,412002 |
| |
| 基金项目： | 国家自然科学基金资助项目(50075032) |
| |
| 摘 要： | 针对国内外现有的金属直接快速制造技术中存在的制件表面质量不高的瓶颈问题,开发了在制造过程中将等离子熔积增材成形与铣削光整减材复合的金属零件直接快速制造方法。研究该复合制造工艺参数对熔积成形性和形状特性以及热态干铣削刀具和工艺的影响规律,找到合理的工艺条件并用其试制出金属零件原型,为改善快速原型表面质量提供了有效的途径。
|
| 关 键 词： | 等离子熔积成形 铣削光整 直接制造 金属零件 |
| 文章编号： | 1004-132X（2005）20-1863-04 |
| 收稿时间： | 2004-11-30 |
| 修稿时间： | 2004-11-30 |
Direct Manufacturing Technology of Metal Parts by Hybrid Plasma Deposition Shaping and Milling Finishing |
| |
| Zhang Hai'ou,Xiong Xinhong,Wang Guilan,Chen Jing. Direct Manufacturing Technology of Metal Parts by Hybrid Plasma Deposition Shaping and Milling Finishing[J]. China Mechanical Engineering, 2005, 16(20): 1863-1866 |
| |
| Authors: | Zhang Hai'ou Xiong Xinhong Wang Guilan Chen Jing |
| |
| Affiliation: | Zhang Hai'ou~1 Xiong Xinhong~1 Wang Guilan~1 Chen Jing~21.State Key Laboratory of Plastic Forming Simulation and Die & Mould Technology,Huazhong University of Science & Technology,Wuhan,4300742.China National South Aeroengine Company,Zhuzhou,412002 |
| |
| Abstract: | For solving the bottleneck problem of low surface quality in existing direct rapid metal prototyping technologies at home and abroad,a direct rapid metal prototyping method by hybrid additive plasma deposition shaping and removable surface milling finish technologies was developed in this paper.By researching the effects of hybrid fabrication processing parameters on deposition formability,shaping features,thermal dry milling tools and the process,suitable processing parameters are found out and metal parts are then trial-manufactured,thereby an effective approach is provided to improve the inside and outside qualities of rapid metal prototype. |
| |
| Keywords: | plasma deposition shaping milling finish direct manufacturing metal part |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
