慢回弹POP的合成及其在泡沫中应用 |
| |
引用本文: | 申宝兵,宗红亮,张丽君,叶丞.慢回弹POP的合成及其在泡沫中应用[J].聚氨酯工业,2014(3):25-28. |
| |
作者姓名: | 申宝兵 宗红亮 张丽君 叶丞 |
| |
作者单位: | 江苏钟山化工责任有限公司; |
| |
摘 要: | 采用自制高效分散剂和选用不同引发剂合成慢回弹聚合物多元醇(POP),获得了固体质量分数24%的慢回弹POP。考察了分散剂的用量和不同引发剂及用量等因素的影响,并以该慢回弹POP和软泡聚醚制备慢回弹泡沫,检测其性能。结果表明,使用慢回弹POP可以明显改善泡沫开孔性并适当提高慢回弹泡沫的力学性能。
|
关 键 词: | 慢回弹 POP 分散剂 引发剂 泡沫 |
Synthesis and Application of POP in Viscoelastic Polyurethane Foam |
| |
Affiliation: | Shen Baobing ,Zong Hongliang ,Zhang Lijun ,Ye Chen ( Jiangsu Zhongshan Chemical Co. Ltd, Nanjing 210047, China) |
| |
Abstract: | The polymer poloys (POP) for producing viscoelstic foam using self-efficient dispersant and different initiators were synthesized. The POP for viscoelastic foam which solid content was 24% was given. With examination about the amount of dispersant, initiator selection, dosage and other factors, viscoelastic foam using viscoelastic POP and soft foam polyether polyols as materials was prepared, and its performance was detected. The results showed that viscoelstic polymer polyols could significantly improved open cell rate and the mechanical properties of viscoelastic foam. |
| |
Keywords: | viscoelastic POP dispersant initiator foam |
本文献已被 CNKI 维普 等数据库收录! |
|