| 基于Qte通信机制的GUI系统 |
| |
| 引用本文： | 宋智宁,姚维. 基于Qte通信机制的GUI系统[J]. 机电工程, 2007, 24(3): 77-80 |
| |
| 作者姓名： | 宋智宁 姚维 |
| |
| 作者单位： | 浙江大学,电气工程学院,浙江,杭州,310027;浙江大学,电气工程学院,浙江,杭州,310027 |
| |
| 摘 要： | 目前,嵌入式系统已得到广泛应用,嵌入式GUI的开发也日趋重要.介绍了嵌入式GUI开发包Qt/Embedded(Qte)内部进程间和对象间的通信机制.以嵌入式轴承故障诊断系统为例,并结合其独特的信号和槽机制,详细给出了GUI系统的设计和实现过程.实验证明,该方案很好地满足了系统实时性要求.
|
| 关 键 词： | 嵌入式GUI Qte 轴承故障诊断 |
| 文章编号： | 1001-4551（2007）03-0077-04 |
| 修稿时间： | 2006-10-17 |
GUI system based on the communication mechanism of Qte |
| |
| SONG Zhi-ning,YAO Wei. GUI system based on the communication mechanism of Qte[J]. Mechanical & Electrical Engineering Magazine, 2007, 24(3): 77-80 |
| |
| Authors: | SONG Zhi-ning YAO Wei |
| |
| Affiliation: | College of Electrical Engineering, Zhefiang University, Hangzhou 310027, China |
| |
| Abstract: | Recently,the embedded sytem has been used widely.At the same time,the development of the GUI is more and more important.The inter-process and inter-object communictaion of Qt/Embedded was given.Taking the bearing fault diagnose system for an example,the design and realization of the GUI system were presented in detail,combined with the unique signal/slot mechanism.The experiments prove that the improved method can meet the real time requirements. |
| |
| Keywords: | embedded GUI Qte bearing fault diagnose |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
