首页 | 本学科首页   官方微博 | 高级检索  
     

统一电能质量调节器的Simulink仿真分析
引用本文:黄云峰,程启明,米建林,王映斐,胡晓青.统一电能质量调节器的Simulink仿真分析[J].上海电力学院学报,2012,28(5):473-477.
作者姓名:黄云峰  程启明  米建林  王映斐  胡晓青
作者单位:上海电力学院电力与自动化工程学院,上海200090
基金项目:上海市教育委员会重点学科建设项目(J51301).
摘    要:介绍了统一电能质量调节器的结构原理,指出了其相对于传统有源电力滤波器的优势.采用dq0谐波检测法作为UPQC的检测方法,采用SVPWM控制法、滞环比较控制法分别作为UPQC串联侧、并联侧的控制方法,并在Simulink软件平台上对电压电流的检测及控制方法进行仿真实验.仿真结果表明了其检测和控制方法的正确性和有效性.

关 键 词:电能质量调节器  dq0谐波检测法  空间矢量PWM  滞环比较  MATLAB仿真
收稿时间:2011/7/16 0:00:00

Simulative Analysis of Unified Power Quality Conditioner on Simulink
HUANG Yun-feng,CHNEG Qi-ming,MI Jian-lin,WANG Ying-fei and HU Xiao-qing.Simulative Analysis of Unified Power Quality Conditioner on Simulink[J].Journal of Shanghai University of Electric Power,2012,28(5):473-477.
Authors:HUANG Yun-feng  CHNEG Qi-ming  MI Jian-lin  WANG Ying-fei and HU Xiao-qing
Affiliation:( School of Electric Power and Automation Engineering, Shanghai University of Electric Power, Shanghai 200090, China)
Abstract:The structural theory of unified power quality conditioner is introduced, and its advantages over the traditional active filters are pointed out. The SVPWM control strategy and the hysteresis comparison control strategy are used as control methods of UPQC series side and UPQC parallel side. The detection method and the control strategy of voltage and current are simulated on Matlab software platform. The simulation results verify the correctness and the effectiveness of the detection method and the control strategy.
Keywords:unified power quality conditioner  dqO harmonic detection method  SVPWM  hysteresis comparison  MATLAB simulation
本文献已被 CNKI 维普 等数据库收录!
点击此处可从《上海电力学院学报》浏览原始摘要信息
点击此处可从《上海电力学院学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号