| 超大型工件的自动加工定位 |
| |
| 引用本文： | 杨传启,翁泽宇.超大型工件的自动加工定位[J].机械与电子,2005(12):24-26. |
| |
| 作者姓名： | 杨传启 翁泽宇 |
| |
| 作者单位： | 浙江工业大学,浙江,杭州,310014 |
| |
| 摘 要： | 针对超大型工件的加工定位问题进行了探讨，提出了利用数控机床本身结合一定的辅助测量设备对加工工件进行测量的方法，然后利用测量点与理论模型体的对应点进行数据计算，从而快速确定工件位置。给出了通过编程软件生成数控加工程序的编程框图，并以实例给予说明。
|
| 关 键 词： | 超大型工件 坐标转换 加工定位 |
| 文章编号： | i001-2257（2005）12-0024-03 |
| 收稿时间： | 2005-06-30 |
| 修稿时间： | 2005年6月30日 |
Auto-locating in Machining Huge Workpiece |
| |
| YANG Chuan-qi,WENG Ze-yu.Auto-locating in Machining Huge Workpiece[J].Machinery & Electronics,2005(12):24-26. |
| |
| Authors: | YANG Chuan-qi WENG Ze-yu |
| |
| Affiliation: | Zhejiang University of Technology, Hangzhou 310014 ,China |
| |
| Abstract: | In this paper, the location and machining of huge workpiece is discussed, some characteristic point coordinates can be obtained by using NC machine tool and measuring equipment, then position of huge wokpiece under machine reference frame can be acquired by computing measure point and according CAD model point. To huge workpiece,NC program can be created by software, and the program frame of software is listed in this paper,by this means ,an example is introduced. |
| |
| Keywords: | huge workpiece coordinates transform locating and machining |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
