| 轮胎压路机前轮轴系结构优化设计 |
| |
| 引用本文： | 邢邦圣,王闵,唐路. 轮胎压路机前轮轴系结构优化设计[J]. 机械研究与应用, 2007, 20(6): 89-90 |
| |
| 作者姓名： | 邢邦圣 王闵 唐路 |
| |
| 作者单位： | 徐州师范大学,机电工程学院,江苏,徐州,221116;徐州工程集团研究院,江苏,徐州,221116;淮南矿业集团潘集机械厂,安徽,淮南,232098 |
| |
| 摘 要： | 对轮胎压路机前轮轴系结构进行优化设计,加大对前轮轴的部分结构尺寸,并进行设计计算和强度校核,对轴上的轴承进行选型设计和寿命计算,新的结构提高了轮胎压路机的工作性能和使用寿命.
|
| 关 键 词： | 轮胎压路机 优化 设计破 |
| 文章编号： | 1007-4414（2007）06-0089-02 |
| 收稿时间： | 2007-08-06 |
| 修稿时间： | 2007-08-06 |
Optimized design of the front - wheel shafting structure of tyre roller |
| |
| Xing Bang-sheng,Wang Ming,Tang Lu. Optimized design of the front - wheel shafting structure of tyre roller[J]. Mechanical Research & Application, 2007, 20(6): 89-90 |
| |
| Authors: | Xing Bang-sheng Wang Ming Tang Lu |
| |
| Abstract: | The structure of front - wheel shafting in tyre roller is improved, and the structural size of the front axle is also partly enlarged. The design compute and strength check is then reckoned, thus the shaft bearing is designed and its service life is calculated in this paper. It is proved that the new structure could be used to improve the working performance and service life of tyre roller. |
| |
| Keywords: | tyre roller optimize design |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
