首页 | 本学科首页   官方微博 | 高级检索  
     

热循环条件下Sn基钎料接头电迁移行为研究
引用本文:姚佳,郭福,左勇,马立民. 热循环条件下Sn基钎料接头电迁移行为研究[J]. 电子元件与材料, 2013, 32(3): 73-76
作者姓名:姚佳  郭福  左勇  马立民
作者单位:1. 北京电子科技职业学院机械工程学院,北京,100176
2. 北京工业大学材料科学与工程学院,北京,100124
基金项目:北京市自然科学基金资助项目,高等学校博士学科点专项科研基金资助项目
摘    要:通过电迁移和热疲劳循环实验,研究了热循环和高电流密度耦合作用下Sn58Bi和Sn3.0Ag0.5Cu钎料焊接接头的失效形式。实验结果表明,在通电和高低温冲击的耦合作用下,两种钎料接头的失效都发生在升温阶段。热循环导致接头内部裂纹的萌生和扩展,导致局部电流密度持续增大,加速了电迁移的发生,最终导致焊点失效。在热电耦合作用下,Sn58Bi钎料接头的使用寿命要长于Sn3.0Ag0.5Cu钎料接头的使用寿命。

关 键 词:Sn基钎料  热循环  电迁移  Sn3.0Ag0.5Cu  Sn58Bi  焊接

Study of electromigration behavior on Sn-based solder joints under thermal cycling
YAO Jia,GUO Fu,ZUO Yong,MA Limin. Study of electromigration behavior on Sn-based solder joints under thermal cycling[J]. Electronic Components & Materials, 2013, 32(3): 73-76
Authors:YAO Jia  GUO Fu  ZUO Yong  MA Limin
Affiliation:1.Department of Mechanic engineering,Beijing Electronic Science & Technology Vocational College,Beijing 100176,China;2.College of Material Science and Engineering,Beijing University of Technology,Beijing 100124,China)
Abstract:By tests of electromigration and thermal fatigue cycle,the failure mechanisms of solder joints of Sn58Bi and Sn3.0Ag0.5Cu were studied under the coupling effect of thermal cycle and high current density.Test results indicate,under the coupling conditions,the failures both occur at heating stage;thermal cycling contributes to cracks nucleation and propagation so as to raise the current density on portions of solder joints,which further accelerates electromigration and induces final failure appearance.Sn58Bi solder joint has a longer life than that of Sn3.0Ag0.5Cu under coupling circumstance.
Keywords:Sn-based solder  thermal cycling  electromigration  Sn3.0Ag0.5Cu  Sn58Bi  solder
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号