| 40Cr钢活塞杆断裂失效分析 |
| |
| 引用本文： | 刘桦,吴玉萍,刘志民.40Cr钢活塞杆断裂失效分析[J].金属热处理,2001,26(10):48-50. |
| |
| 作者姓名： | 刘桦 吴玉萍 刘志民 |
| |
| 作者单位： | 1. 山东科技大学机电学院
2. 山东煤矿莱芜煤机厂 |
| |
| 摘 要： | 对40Cr钢质活塞杆断裂进行了失效分析。结果表明，活塞杆宏观断口为脆性断裂，微观断口为解理与准解理断裂。表层组织是上贝氏体、铁素体和屈氏体而非回火索氏体，材质中含有块状及球状非金属夹杂物，导致强度低，脆性大，最终脆性断裂，应加大冷却速度，得到马氏体组织，经调质得到回火索氏体，提高活塞杆的综合力学性能。
|
| 关 键 词： | 失效分析 活塞杆 脆性断裂 40Cr钢 压滤机 |
| 文章编号： | 0254-6051(2001)10-0048-03 |
Failure Analysis of Fracture on 40Cr Piston Rod |
| |
| LIU Hua ,WU Yu ping ,LIU Zhi min.Failure Analysis of Fracture on 40Cr Piston Rod[J].Heat Treatment of Metals,2001,26(10):48-50. |
| |
| Authors: | LIU Hua WU Yu ping LIU Zhi min |
| |
| Affiliation: | LIU Hua 1,WU Yu ping 1,LIU Zhi min 2 |
| |
| Abstract: | Failure analysis of fracture on 40Cr piston rod is proceeded.Results indicate that macroscope crack is brittle fracture and microscopic crack is cleavage and quasi cleavage crack.Surface structure is upper bainite ferrite and troostite and not tempered sorbite,there are massive and globular non metallic inclusion in material,low strength and big fragility leaded to brittle fracture.By increasing cooling rate to gain martensite and by quenching and tempering to gain tempered sorbite,rod's mechanical properties can be improved. |
| |
| Keywords: | failure analysis piston rod brittle fracture |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
