注射模中冷却系统的设计 |
| |
引用本文: | 刘建华,汪立胜. 注射模中冷却系统的设计[J]. 模具制造, 2010, 10(4): 29-32 |
| |
作者姓名: | 刘建华 汪立胜 |
| |
作者单位: | 广东省技师学院工业设计与制造系,广东博罗,516100 |
| |
摘 要: | 针对注射模中模具温度对塑件的影响,提出了在注射模中设计冷却系统的设计方案,同时也介绍了在设计冷却系统的过程中应该注意的一些事项。
|
关 键 词: | 注射模 冷却系统 模温 结构设计 |
Design of Cooling System in Injection Mold |
| |
Abstract: | According to the effects of injection mold temperature to plastic products quality, proposed design project of injection mold cooling system, and introduced attentions in designing the cooling system. |
| |
Keywords: | injection mold cooling system mold temperature structure design |
本文献已被 CNKI 维普 万方数据 等数据库收录! |