Refrigerant R134a vaporisation heat transfer and pressure drop inside a small brazed plate heat exchanger |
| |
Authors: | GA Longo A Gasparella |
| |
Affiliation: | aDepartment of Management and Engineering, University of Padova, Stradella S. Nicola 3, I-36100 Vicenza, Italy |
| |
Abstract: | This paper presents the experimental heat transfer coefficients and pressure drop measured during refrigerant R134a vaporisation inside a small brazed plate heat exchanger (BPHE): the effects of heat flux, refrigerant mass flux, saturation temperature and outlet conditions are investigated. The BPHE tested consists of 10 plates, 72 mm in width and 310 mm in length, which present a macro-scale herringbone corrugation with an inclination angle of 65° and corrugation amplitude of 2 mm.The experimental results are reported in terms of refrigerant side heat transfer coefficients and frictional pressure drop. The heat transfer coefficients show great sensitivity both to heat flux and outlet conditions and weak sensitivity to saturation temperature. The frictional pressure drop shows a linear dependence on the kinetic energy per unit volume of the refrigerant flow.The experimental heat transfer coefficients are also compared with two well-known correlations for nucleate pool boiling and a correlation for frictional pressure drop is proposed. |
| |
Keywords: | Heat exchanger Plate exchanger Experiment Heat transfer Pressure drop Evaporation R134aMots clé s: É changeur de chaleur É changeur à plaques Expé rimentation Transfert de chaleur Chute de pression É vaporation R134a |
本文献已被 ScienceDirect 等数据库收录! |
|