| 多束动态混合注入技术制备TiN厚膜的工艺、结构及性能研究 |
| |
| 引用本文： | 任春生,牟宗信,刘振民,龙振湖,杨黎明. 多束动态混合注入技术制备TiN厚膜的工艺、结构及性能研究[J]. 核技术, 2000, 23(10): 678-682 |
| |
| 作者姓名： | 任春生 牟宗信 刘振民 龙振湖 杨黎明 |
| |
| 作者单位： | 大连理工大学三束材料改性国家重点实验室 大连116024 |
| |
| 摘 要： | 在多束动态混合(MBMI)-注入系统上利用MBMI技术制备TiN膜，XRD分析表明，N入射角度α(o)、氮钛原子到达比RN/Ti、N2分压PN2对膜生长的择优取向及相结构有影响；性能研究结果表明，高的入射离子能量Ei、基体温度Ts以及合适的RN/Ti对TiN膜的显微硬度HK和膜 -基结合力都有正面影响。
|
| 关 键 词： | 氮化钛膜 制备 结构 性能 MBMI IBAD |
| 修稿时间： | 1998-11-09 |
A study on process, structure and characteristics of TiNthick film pre pared by MBMI technology |
| |
| REN Chunsheng,MOU Zongxin,LIU Zhenmin,LONG Zhenhu,YANG Liming. A study on process, structure and characteristics of TiNthick film pre pared by MBMI technology[J]. Nuclear Techniques, 2000, 23(10): 678-682 |
| |
| Authors: | REN Chunsheng MOU Zongxin LIU Zhenmin LONG Zhenhu YANG Liming |
| |
| Abstract: | TiN thick films were prepared by multi-ion-beam dynamic mixing implanting (MBMI) technology a nd their structure and characteristics were analyzed by XRD, microhardness analysis and scratch test. The structure analysis results indicate that t he phase structure of TiN films are affected by the implantation angle of nitrogen ion, the nitrogen to titanium atom ratio and the pressure of nitr ogen gas. The performance tests show that higher temperature of substrate Ts and suitable RN/Ti are important for increasing the microhardness (HK) of TiN films and the stickiness between TiN film and substrate. |
| |
| Keywords: | Multi-ion-beam dynamic mixing Ion beam enhanced deposition Ion implantation Preferred orientation |
| 本文献已被 万方数据 等数据库收录！ |
