| 基于SolidWorks的CAD模型直接切层研究 |
| |
| 引用本文： | 张建平,胥光申,金京,罗声.基于SolidWorks的CAD模型直接切层研究[J].西北纺织工学院学报,2010(4):525-529. |
| |
| 作者姓名： | 张建平 胥光申 金京 罗声 |
| |
| 作者单位： | 西安工程大学机电工程学院,陕西西安710048 |
| |
| 基金项目： | 国家自然科学基金资助项目（50745017;50875194） |
| |
| 摘 要： | 针对面曝光快速成形系统的需要,提出了基于SolidWorks的CAD模型直接切层方法.利用SolidWorks在工程图环境下的剖切功能,实现对CAD模型的直接切层.解决了对复杂CAD模型切层时出现的截面错位问题.论述了用于多种曝光模式的截面填充样式的实现方法.以该切层方法得到的CAD模型的截面图形作动态掩膜,利用面曝光快速成形系统成功制作出了三维实体原型,表明该直接切层方法适用于面曝光快速成形系统.
|
| 关 键 词： | 面曝光 快速成形 切层 CAD模型 |
Research on direct slicing method based on solidworks for CAD models |
| |
| ZHANG Jian-ping,XU Guang-shen,JIN Jing,LUO Sheng.Research on direct slicing method based on solidworks for CAD models[J].Journal of Northwest Institute of Textile Science and Technology,2010(4):525-529. |
| |
| Authors: | ZHANG Jian-ping XU Guang-shen JIN Jing LUO Sheng |
| |
| Affiliation: | (School of Mechanical ＆ Electrical Engineering,Xi＇an Polytechnic University,Xi＇an 710048,China) |
| |
| Abstract: | According to the need of Mask Projection Stereo-lithography system,a new direct slicing method of CAD model based on SolidWorks is proposed.It is achieved by slicing function which can be used at SolidWorks′ drawing environment.When slicing the complex CAD model,cross-section misalignment issue is solved.The method of developing the cross-section filling styles for variety of exposure modes was described.Dynamic graphic masks were created by the cross-section that was got through the new slicing method,and using Mask Projection Stereo-lithography system,a three-dimensional part was fabricated.The experiment result indicates that the direct slicing method can be applied to Mask Projection Stereo-lithography system. |
| |
| Keywords: | mask exposal rapid prototyping slicing CAD model |
| 本文献已被 维普 等数据库收录！ |
|
