| 多台阶深筒形件成形工艺设计及仿真 |
| |
| 引用本文： | 张金鹏,陈文琳,周煜辰,周瑞,杨栋.多台阶深筒形件成形工艺设计及仿真[J].精密成形工程,2013,5(4):31-34. |
| |
| 作者姓名： | 张金鹏 陈文琳 周煜辰 周瑞 杨栋 |
| |
| 作者单位： | 合肥工业大学材料科学与工程学院,合肥,230009 |
| |
| 摘 要： | 根据塑性成形理论分析、计算确定某电器产品的阶梯圆筒件成形工艺,并建立有限元模型,实现多道次拉深过程的仿真.最后对仿真结果进行分析和试验验证.
|
| 关 键 词： | 阶梯筒形件 拉深 工艺设计 仿真 |
| 收稿时间： | 2/9/2013 12:00:00 AM |
| 修稿时间： | 6/1/2013 12:00:00 AM |
The Forming Process Designing and Simulation of Multi-step Deep Cylindrical Part |
| |
| ZHANG Jin-peng,CHEN Wen-lin,ZHOU Yu-chen,ZHOU Rui and YANG Dong.The Forming Process Designing and Simulation of Multi-step Deep Cylindrical Part[J].Journal of Netshape Forming Engineering,2013,5(4):31-34. |
| |
| Authors: | ZHANG Jin-peng CHEN Wen-lin ZHOU Yu-chen ZHOU Rui and YANG Dong |
| |
| Affiliation: | School of Material Science and Engineering, Hefei University of Technology, Hefei 230009, China;School of Material Science and Engineering, Hefei University of Technology, Hefei 230009, China;School of Material Science and Engineering, Hefei University of Technology, Hefei 230009, China;School of Material Science and Engineering, Hefei University of Technology, Hefei 230009, China;School of Material Science and Engineering, Hefei University of Technology, Hefei 230009, China |
| |
| Abstract: | This paper calculates and determines the forming process of the stepped cylindrical piece of an electrical product based on the theoretical analysis of plastic forming. Then this paper implements the simulation of deep drawing process using the finite element model of multi-channel. Finally, it give the analysis with the results of simulation and experimental verification. |
| |
| Keywords: | stepped cylindrical part drawing process design simulation |
| 本文献已被 万方数据 等数据库收录！ |
| 点击此处可从《精密成形工程》浏览原始摘要信息 |
|
点击此处可从《精密成形工程》下载全文 |
|
