| 基于ARM和PLC的新型绕线机控制系统设计 |
| |
| 引用本文： | 陈豪杰,李晓潮.基于ARM和PLC的新型绕线机控制系统设计[J].机电产品开发与创新,2009,22(5):134-136. |
| |
| 作者姓名： | 陈豪杰 李晓潮 |
| |
| 作者单位： | 陈豪杰(厦门厦顺铝箔有限公司,福建,厦门,361002);李晓潮(厦门大学电子工程系,福建,厦门,361005) |
| |
| 摘 要： | 为了满足微电机精密绕线工艺的需要和生产一体化集中管理的的要求,本文基于ARM、PLC和WinCE的软硬件平台设计了绕线机的控制系统。系统利用PLC完成基本的流程控制和逻辑控制,利用ARM的丰富资源和外设,完成人机的交互并通过以太网外设接口接入控制网络,与其他设备组成一体化集中控制网络,利用WINCE友好的程序界面完成人机交互的实现。在绕线方式上,主轴控制模式采用张力控制模式代替原有的速度或位置模式,并在排线算法上引入PD调节器调节排线电机的速度,使得绕线更加平稳,质量更优异。本系统实现了一种性能优异,价格低廉,适用一体化管理的绕线机控制系统,基本达到国内先进水平。
|
| 关 键 词： | 自动绕线机 PLC ARM 排线算法 |
Design of Winding Machine Control System Based on ARM and PLC |
| |
| Affiliation: | CHEN Hao-Jie, LI Xiao-Chao (1.Xiashun Holdings Limited, Xiamen Fujian 361002, China; 2.Xiamen University, Xiamen Fujian 361005, China) |
| |
| Abstract: | In order to satisfy the technics of precision winding for motor and request for incorporate manage or control in the manufacture. This paper introduces a winding machine system based on ARM9, PLC and WinCE. PLC is used for complete the control of flow and logic.Arm is used for human-machine interface and connecting to the network of control by the rich resource and peripheral interface.It can makeup the incorporate control net with other equipments.WinCE is used for programming the applied software by his friendly interface.In the winding mode, principal axis control mode uses tensile control instead of speed or place mode and import PD adjuster adjust the speed of routing motor to make the winding more steady and the quality more excellent.The system implement a control system with excellent performance,low cost,fitting for incorporate manage,and it reach the advanced level of inland. |
| |
| Keywords: | PLC ARM |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
