| 基于热模态分析的热误差温度测点优化选择 |
| |
| 引用本文： | 张琨,张毅,侯广锋,杨建国. 基于热模态分析的热误差温度测点优化选择[J]. 机床与液压, 2012, 40(7): 1-3 |
| |
| 作者姓名： | 张琨 张毅 侯广锋 杨建国 |
| |
| 作者单位： | 上海交通大学机械工程学院,上海,200240 |
| |
| 基金项目： | "高档数控机床与基础制造装备"国家科技重大专项项目 |
| |
| 摘 要： | 针对影响机床热误差建模的温度场分布问题,提出一种热模态分析方法,对机床热误差建模温度测点进行优化选择。以数控机床主轴温度场分析为例,利用热模态方法得到主轴各模态的时间常数、温度场及热变形模态形状,从而确定温度测点的最优位置。并通过实验验证了所建立模型的准确性与鲁棒性。
|
| 关 键 词： | 数控机床 热误差 温度测点选择 热模态 |
Selection of Sensor Placement for Thermal Error Compensation Based on Thermal Mode Analysis |
| |
| ZHANG Kun , ZHANG Yi , HOU Guangfeng , YANG Jianguo. Selection of Sensor Placement for Thermal Error Compensation Based on Thermal Mode Analysis[J]. Machine Tool & Hydraulics, 2012, 40(7): 1-3 |
| |
| Authors: | ZHANG Kun ZHANG Yi HOU Guangfeng YANG Jianguo |
| |
| Affiliation: | (School of Mechanical Engineering,Shanghai Jiaotong University,Shanghai 200240,China) |
| |
| Abstract: | Aimed at the influence of temperature field distribution of machine tool on thermal error modeling,a method based on thermal mode analysis was proposed to select the optimum points of temperature sensors.Time constants,temperature field and thermal expansion modal shapes of the spindle were calculated,so the optimum locations of temperature sensors were obtained.Satisfactory results are achieved in terms of model accuracy and robustness through experiment. |
| |
| Keywords: | Machine tool Thermal error Temperature sensor placement Thermal mode |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
