| 联轴器加工工艺的设计与改进 |
| |
| 引用本文： | 郎洪明.联轴器加工工艺的设计与改进[J].江苏机械制造与自动化,2007,36(6):48-49. |
| |
| 作者姓名： | 郎洪明 |
| |
| 作者单位： | 江汉大学文理学院,湖北武汉430056 |
| |
| 摘 要： | 分析了联轴器加工工艺试验过程，提出在制定工件加工工艺时，要全面考虑影响加工工艺的因素，确定工艺方案时，首先是要保证加工品质，其次则应兼顾经济性。
|
| 关 键 词： | 进料口 加工工艺 分析 |
| 文章编号： | 1671-5276（2007）06-0048-02 |
| 收稿时间： | 2007-04-26 |
The Technological Design and the Improvement of the Coupling |
| |
| LANG Hong-ming.The Technological Design and the Improvement of the Coupling[J].Jiangsu Machine Building & Automation,2007,36(6):48-49. |
| |
| Authors: | LANG Hong-ming |
| |
| Abstract: | This paper analyses the test process of the manufacture technics of couplings and brings forward the factor of round influence on manufacture technics when setting down manufacture technics. The manufacture quality is first, then benefit, when choosing manufacture technics. |
| |
| Keywords: | coupling between two axis manufacture technics analyze |
| 本文献已被 维普 等数据库收录！ |
