| 用于焊缝跟踪的光电传感器 |
| |
| 引用本文： | 尹懿,洪波,黄俊,屈岳波,袁灿. 用于焊缝跟踪的光电传感器[J]. 仪表技术与传感器, 2005, 0(11): 6-8,12 |
| |
| 作者姓名： | 尹懿 洪波 黄俊 屈岳波 袁灿 |
| |
| 作者单位： | 1. 南昌工程学院机电工程系,江西,南昌,330029
2. 湘潭大学机械工程学院,湖南,湘潭,411105 |
| |
| 摘 要： | 研制了一种用于焊缝自动跟踪的光电传感器,提出了一种加权比较的信号处理方法,并通过采用模糊控制,提高单点式光电传感器的精度.实验表明：其跟踪精度达到1 mm,满足实际生产应用的要求.而且光电传感器成本低、结构简单、跟踪精度高,具有很高的实用价值.
|
| 关 键 词： | 光电传感器 焊缝跟踪 信号处理 |
| 文章编号： | 1002-1841（2005）11-0006-03 |
| 收稿时间： | 2004-08-28 |
| 修稿时间： | 2004-08-282005-09-19 |
Photoelectric Sensor''''s Application in Seam Tracking |
| |
| YIN Yi,HONG Bo,HUANG Jun,QU Yue-bo,YUAN Can. Photoelectric Sensor''''s Application in Seam Tracking[J]. Instrument Technique and Sensor, 2005, 0(11): 6-8,12 |
| |
| Authors: | YIN Yi HONG Bo HUANG Jun QU Yue-bo YUAN Can |
| |
| Affiliation: | 1. Mechanical and Electronic Engineering Department, Nanchang Institute of Technology, Nanchang 330020, China; 2. School of Mechanical Engineering, Xiangtan University, Xiangtan 411105, China |
| |
| Abstract: | A photoelectric sensor which applied in seam tracking system was studied. A method of signal process was put forward, and through fuzzy control, the precision of sensor has been greatly improved. The sensor experiments and seam tracking welding experiments show that the precision is l mm which achieved the requests of industrial manufacturing. The photoelectric sensor also has the advantage of low cost, high precision and simple structure, which bring the sensor highly practical application value. |
| |
| Keywords: | Photoelectric Sensor Seam Tracking Signal Process |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
