| G6膜片高速连续级进模设计 |
| |
| 引用本文： | 汪洋. G6膜片高速连续级进模设计[J]. 模具技术, 2005, 0(4): 13-16,30 |
| |
| 作者姓名： | 汪洋 |
| |
| 作者单位： | 大连大显股份有限公司,辽宁,大连,116035 |
| |
| 摘 要： | 通过对G6膜片高速连续级进模的设计，介绍了高精密冷冲压模具的主要设计程序，并详细介绍了预冲孔、子模、落料复位等模具结构在高速连续级进模中的应用。该模具结构都经过实践的检验，模具运行状态平稳，生产的零件质量可靠。
|
| 关 键 词： | G6膜片 预冲孔 级进模 |
| 文章编号： | 1001-4934(2005)04-0013-04 |
Design of Highspeed Progressive Dies for G6 Membrane |
| |
| WANG Yang. Design of Highspeed Progressive Dies for G6 Membrane[J]. Die and Mould Technology, 2005, 0(4): 13-16,30 |
| |
| Authors: | WANG Yang |
| |
| Abstract: | Through the design of high-speed progressive dies for G6 membrane. the main design procedure for precision cold-punching dies is introduced. The application of prepunched holes, sub-dies, blanking resetting in high-speed progressive dies is introduced too. The die structure is proved in practice - Its running state is steady, and the quality of processed parts is reliable. |
| |
| Keywords: | G6 membrane pre-punched hole progressive die |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
