|
|||||
|
|
| 多绳摩擦提升机天轮衬垫的有限元分析 | |
| 引用本文： | 杨帆,孟国营,吴炳胜.多绳摩擦提升机天轮衬垫的有限元分析[J].煤炭工程,2011,0(3):99-101. |
| 作者姓名： | 杨帆 孟国营 吴炳胜 |
| 作者单位： | 1. 河北工程大学,机电工程学院,河北,邯郸,056038;中国矿业大学(北京)机电学院,北京,100083 2. 中国矿业大学(北京)机电学院,北京,100083 3. 河北工程大学,机电工程学院,河北,邯郸,056038 |
| 摘 要： | 根据天轮衬垫的工作环境，用Pro/E软件建立了全新、磨损1/5、磨损1/3、磨损1/2和磨损2/3的衬垫三维模型，将模型导入ANSYS软件进行有限元分析，通过网格划分得到衬垫的有限元模型，以衬垫横向完全约束，纵向施加均布力作为加载工况，得出此工况下不同磨损程度的衬垫的应力与位移分布规律，将有限元分析结果对比研究，得出故障天轮衬垫的临界值。结论可为衬垫的故障分析提供依据，保证衬垫工作在正常范围内。 |
| 关 键 词： | 天轮衬垫 磨损 有限元分析 |
| 收稿时间： | 2011-01-11; |
Finite Element Analysis on Sheave Liner of Multi Rope Friction Hoist |
|
| YANG Fan,MENG Guo-ying,WU Bing-sheng.Finite Element Analysis on Sheave Liner of Multi Rope Friction Hoist[J].Coal Engineering,2011,0(3):99-101. | |
| Authors: | YANG Fan MENG Guo-ying WU Bing-sheng |
| Affiliation: | YANG Fan1,2,MENG Guo-ying2,WU Bing-sheng1(1.School of Electromechanical Engineering,Hebei University of Engineering,Handan 056038,China,2.School of Electromechanical Engineering,China University of Mining and Technology(Beijing),Beijing10083,China) |
| Abstract: | According to the working environment of the sheave liner,the Pro/E software was applied to establish the 3D model of brand-new liner,1/5 abrasion liner,1/3 abrasion liner,1/2 abrasion liner and 2/3 abrasion liner.With the model lead-in,the ANSYS software was applied to the finite element analysis.With the liner finite element model obtained from the dividing by the grids,with the liner laterally full restrained and longitudinally had equal distributed forces as the loading performances,the stress and displa... |
| Keywords: | sheave liner abrasion finite element analysis |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |
| 点击此处可从《煤炭工程》浏览原始摘要信息 | |
| 点击此处可从《煤炭工程》下载全文 | |