热处理工艺对Ti53311S钛合金组织与性能的影响 |
| |
引用本文: | 马保飞,张英明,段启辉,郭金明,周立鹏.热处理工艺对Ti53311S钛合金组织与性能的影响[J].钛工业进展,2013,30(1):23-26. |
| |
作者姓名: | 马保飞 张英明 段启辉 郭金明 周立鹏 |
| |
作者单位: | 西北有色金属研究院,陕西西安,710016 |
| |
摘 要: | 研究了低温退火和高温淬火+时效两种热处理方式对Ti53311S钛合金棒材显微组织与力学性能的影响。实验结果表明:经两种不同热处理制度处理后,均能获得满足Q/XB1517—1998标准要求的Ti53311S钛合金棒材。经650oC低温退火处理后可获得等轴a+β组织,经高温淬火+时效处理后可获得等轴初生a+含针状a的转变β双态组织。在生产中,可根据实际情况选取更为适宜的热处理方式,其中,较为经济的热处理方式为650℃×60min/AC;可获得较好力学性能的热处理方式为980℃×(30~90)min/WQ+650℃×6h/AC。
|
关 键 词: | Ti53311S钛合金 热处理 显微组织 力学性能 |
Effect of Heat Treatment on Microstructure and Mechanical Properties of Ti53311S Titanium Alloy |
| |
Authors: | Ma Baofei Zhang Yingming Duan Qihui Guo Jinming Zhou Lipeng |
| |
Affiliation: | (Northwest Institute for Nonferrous Metal Research,Xi’an 710016,China) |
| |
Abstract: | Low temperature annealing and high temperature quenching combines with aging were two common heat treatment processes, and the effects of these processes on microstructure and mechanical properties of Ti53311S titani- um alloy were investigated. The results show that properties of Ti53311S titanium bars processed by them both can meet the standard of Q/XB 1517--1998. Equiaxial primary a +β structure is obtained at the 650 ℃ annealing. When quenched at high temperature and aged at 650℃, the microstructure is double phase. The proper heat treatment process can be selected by the situation, the more economical heat treatment processing is 650 ℃ × 60 min/AC, and better mechanical properties can be obtained by using 980℃ ×(30 - 90) min/WQ + 650℃ × 6 h/AC. |
| |
Keywords: | Ti53311S titanium alloy heat treatment microstructure mechanical properties |
本文献已被 CNKI 维普 万方数据 等数据库收录! |