| 烧结温度对WZV材料力学性能和显微结构的影响 |
| |
| 引用本文： | 杨发展,赵军,艾兴,姜志泉.烧结温度对WZV材料力学性能和显微结构的影响[J].材料科学与工艺,2009,17(3):364-367,372. |
| |
| 作者姓名： | 杨发展 赵军 艾兴 姜志泉 |
| |
| 作者单位： | 杨发展,YANG Fa-zhan(山东大学机,械工程学院,济南,250061;青岛理工大学机械工程学院,青岛,266033);赵军,艾兴,ZHAO Jun,AI Xing(山东大学机,械工程学院,济南,250061);姜志泉,JIANG Zhi-quan(山东省莱阳市农业机械化学校,莱阳,265200) |
| |
| 基金项目： | 国家自然科学基金，国家重点基础研究发展规划(973计划) |
| |
| 摘 要： | 为了开发一种新型刀具材料,以WC、ZrO2和VC为原料,利用热压烧结工艺,分别在1500、1550、1600℃和1650℃烧结温度下制备了4种相同成分的WC/ZrO2/VC(WZV)复合材料.分析了烧结温度与刀具材料相对密度、硬度、抗弯强度和断裂韧性之间的关系,研究了烧结温度对刀具材料力学性能和显微结构的影响,确定了该材料合理的烧结温度为1550℃.试验结果表明,ZrO2质量分数为10%的WZV复合粉末经过48 h的高能球磨,在1550℃、30 MPa的热压烧结条件下,可获得相对密度为99.2%,维氏硬度为17.6 GPa,抗弯强度为786 MPa,断裂韧性为11.51 MPa.m1/2的优异性能.此外,通过对材料显微结构和断裂方式的分析,发现烧结温度对材料的断裂方式具有重要影响.
|
| 关 键 词： | 复合材料 力学性能 WC 显微结构 |
Effects of sintering temperature on mechanical properties and microstructure of WZV material |
| |
| YANG Fa-zhan,ZHAO Jun,AI Xing,JIANG Zhi-quan.Effects of sintering temperature on mechanical properties and microstructure of WZV material[J].Materials Science and Technology,2009,17(3):364-367,372. |
| |
| Authors: | YANG Fa-zhan ZHAO Jun AI Xing JIANG Zhi-quan |
| |
| Affiliation: | YANG Fa-zhan1,2,ZHAO Jun1,AI Xing1,JIANG Zhi-quan3 (1.School of Mechanical Engineering,Sh,ong University,Jinan 250061,China,2.School of Mechanical Engineering,Qingdao Technological University,Qingdao 266033,3.School of Farming Mechanization,Laiyang 265200,China) |
| |
| Abstract: | In order to exploit a new kind of tool material,WC/ZrO2/VC composite materials were prepared by hot press-sintering.Effects of sintering temperature on mechanical properties and microstructure of the materials were investigated by analyzing the relative density,hardness,bending strength,fracture toughness,fractured surfaces and crack morphologies of the specimens prepared at sintering temperatures of 1500,1550,1600 and 1650 ℃,respectively.Experimental results show that after being ball-milled for 48 hours and treated by hot press-sintering at 1550 ℃,the composite powders WC/ZrO2/VC exhibit ideal properties of 99.2% in relative density,17.6 GPa in hardness,786 MPa in bending strength and 11.51 MPa·m1/2 in fracture toughness.It is indicated that the sintering temperature has important effect on microstructure and fracture morphologies of the materials. |
| |
| Keywords: | WC |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
