首页 | 本学科首页   官方微博 | 高级检索  
     

XD合成Al2O3,TiB2/Al复合材料的热力学分析
引用本文:朱和国,吴申庆,王恒志.XD合成Al2O3,TiB2/Al复合材料的热力学分析[J].中国有色金属学报,2001,11(3):382-385.
作者姓名:朱和国  吴申庆  王恒志
作者单位:1. 东南大学材料科学与工程系;南京理工大学材料科学与工程系
2. 东南大学材料科学与工程系,
3. 南京理工大学材料科学与工程系,
摘    要:从热力学的角度讨论了原位反应生成Al2O3和TiB2陶瓷粒子增强铝基复合材料的合成机理。结果表明,在Al-TiO2-B体系中,以一定的加热速率加热至1073K左右时,Al与TiO2之间首先发生铝热反应,反应产生出活性钛原子并形成Al-Ti-B反应;AlB2和Al3Ti均系反应中间产物,Alb2在1200K左右时分解为Al和B2Al3Ti被B还原,当B的加入量(摩尔)是TiO2的两部左右时,Al3Ti基本消失,最终生成Al2O3和TiB2陶瓷颗粒增强的铝基复合材料。

关 键 词:原位反应  陶瓷粒子  热力学  铝基复合材料
文章编号:1004-0609(2001)03-0382-04
修稿时间:2000年10月15

Thermodynamics analysis of Al2O3, TiB2 /Al composites fabricated by exothermic dispersion method
ZHU He-guo.Thermodynamics analysis of Al2O3, TiB2 /Al composites fabricated by exothermic dispersion method[J].The Chinese Journal of Nonferrous Metals,2001,11(3):382-385.
Authors:ZHU He-guo
Abstract:The thermodynamics of in-situ reaction from the reaction system of Al-TiO2-B to form Al2O3, TiB2/Al composites was studied. The results show that under the condition of certain heating rate, aluminum reacts with TiO2 firstly at 1?073?K and then forms Al-Ti-B reaction system. The phases of AlB2 and Al3Ti occur during the reaction process as medi-products and the AlB2 phase is decomposed into Al and B at the temperature of about 1?200?K, meanwhile, Al3Ti is deduced by B to form TiB2. When the mole ratio of B/TiO2 is about two, the Al3Ti phase is almost eliminated completely.
Keywords:
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号