Synthesis of Ti3SiC2 by infiltration of molten Si |
| |
Authors: | Sung Sic HwangJaeHo Han Dongyun Lee Sang-Whan Park |
| |
Affiliation: | a SKC Solmics, 624, Jangdang-dong, Pyeongtaek-si, Kyounggi-Do 459-020, Republic of Korea b Materials Science and Technology Division, Korea Institute of Science and Technology, 39-1 Hawolgok-dong, Seongbuk-gu, Seoul 136-791, Republic of Korea c Department of Nanofusion Engineering, College of Nanoscience and Nanotechnology, Pusan National University, Busan 609-735, Republic of Korea |
| |
Abstract: | High-purity Ti3SiC2 compounds have been fabricated by infiltration of molten Si into a precursor, a partially sintered TiCx (x = 0.67) preform. The Si source and the TiCx preform were placed side by side on carbon cloth, and the system was heated to 1550 °C. Molten Si infiltrated the preform through the carbon cloth, and a direct reaction between TiCx and molten Si immediately occurred at the reaction temperature to yield pure Ti3SiC2. We could observe phase formation and the microstructure of the bulk products with time, which were investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM) equipped with energy-dispersive spectroscopy (EDS). Pure Ti3SiC2 compounds were formed on the exterior of the TiCx preform at 1550 °C when the sintered TiCx:Si ingot molar ratio was 3:1.4. At 1550 °C, no other minor phases were detected for any of the sintering time ranges. |
| |
Keywords: | Ti3SiC2 Infiltration TiCx preform Molten Si |
本文献已被 ScienceDirect 等数据库收录! |
|