Experimental study on the heat transfer characteristics of fluoride salt in the new conceptual passive heat removal system of molten salt reactor

A new conceptual design of a passive residual heat removal system (PRHRS) has been proposed for molten salt reactor. High‐temperature heat pipes are used in this new design to improve the system inherent safety and make the PRHRS more compact. An experimental system using fluoride salt FLiNaK has been constructed to validate and support the future design of PRHRS of molten salt reactors. In this research, tests on the natural convection heat transfer of FLiNaK in the drain tank with an inclined heat pipe inserted at different heights were performed. The temperature distribution of fluoride salt in the tank was analyzed. The height of heat pipe and the bulk temperature of FLiNaK have little influence on the normalized salt temperature distribution. However, with the height of heat pipe increasing, the temperature difference of molten salt decreases and heat transfer coefficient of natural convection increases. In addition, the empirical correlations of natural convection heat transfer between liquid FLiNaK and inclined heat pipe are obtained within the range of Rayleigh numbers from 3.97 × 10⁶ to 1.16 × 10⁷. The comparisons show that a good agreement with less than 5% deviation is obtained between the proposed correlations and the test data.