Hydraulic Models of the Flow Distribution in a Four Branch Open Channel Junction with Supercritical Flow |
| |
Authors: | Emmanuel Mignot Nicolas Rivière André Paquier Richard J. Perkins |
| |
Affiliation: | 1Laboratoire de Mécanique des Fluides et d’Acoustique, Université de Lyon, CNRS, Ecole Centrale de Lyon, INSA de Lyon, Université Claude Bernard Lyon I, 20 Av. A. Einstein, 69621 Villeurbanne, France; formerly, Cemagref Hydrology-Hydraulics Research Unit, 3 bis, quai Chauveau, CP 220, 69336 Lyon Cedex 09, France. E-mail: emmanuel.mignot@insa-lyon.fr 2Laboratoire de Mécanique des Fluides et d’Acoustique, Université de Lyon, CNRS, Ecole Centrale de Lyon, INSA de Lyon, Université Claude Bernard Lyon I, 20 Av. A. Einstein, 69621 Villeurbanne, France. E-mail: Nicolas.Riviere@insa-lyon.fr 3Cemagref, HHLY Hydrology-Hydraulics Research Unit, 3 Bis, Quai Chauveau, CP 220, 69336 Lyon Cedex 09, France. E-mail: andre.paquier@cemagref.fr 4Laboratoire de Mécanique des Fluides et d’Acoustique, Université de Lyon, CNRS, Ecole Centrale de Lyon, INSA de Lyon, Université Claude Bernard Lyon I, 36 av. Guy de Collongue, 69134 Ecully Cedex, France. E-mail: Richard.Perkins@ec-lyon.fr
|
| |
Abstract: | Intense rainfall on urban areas can generate severe flooding in the city, and if the conditions are right, the flow in the streets can be supercritical. The redistribution of the flow in street intersections determines the flow rates and water levels in the street network. We have investigated the flow that occurs when two supercritical flows collide in a 90° junction formed by streets of identical cross section. Several flow configurations within the intersection are possible, depending on the position of the hydraulic jumps that form in and upstream of the intersection. Previous work has identified three flow types, with Type II flows being further classified into three subregimes. Hydraulic models have been developed, based on the principles of the conservation of flow and momentum flux in the intersection, which predict the angles at which the jumps will form. These models can be used to determine the flow type that will occur. Moreover, additional models have been developed for computing the outflow discharge distribution. For Type I flows, it has not been possible to develop such a hydraulic model for the discharge distribution, but some data are provided for one configuration to indicate the influence of different parameters. For Type II and Type III flows, such models are developed, and their predictions agree with data obtained from the channel intersection facility at the Laboratory of Fluid Mechanics and Acoustics in Lyon. |
| |
Keywords: | Critical flow Experimentation Hydraulic models Channel flow |
|
|