| 管壳式换热器流场三维数值模拟 |
| |
| 引用本文： | 解衡,高祖瑛.管壳式换热器流场三维数值模拟[J].核科学与工程,2002,22(3):240-243. |
| |
| 作者姓名： | 解衡 高祖瑛 |
| |
| 作者单位： | 清华大学核能技术研究院,北京,100084 |
| |
| 摘 要： | 采用多孔介质方法 ,在PHOENICS 3 3程序的基础上建立了换热器的三维流动计算模型。引入体积穿透率、表面穿透率、分布阻力等来描述换热器内的管束。模型通过计算Halle等1] 的实验工况来进行验证 ,并尝试用于计算 2 0 0MW低温供热堆主换热器内的流场
|
| 关 键 词： | 换热器 多孔介质 数值模拟 低温供热堆 |
Three Dimensional Numerical Simulation of Flow in the Shell-Tube Heat Exchanger |
| |
| XIE Heng,GAO Zuying.Three Dimensional Numerical Simulation of Flow in the Shell-Tube Heat Exchanger[J].Chinese Journal of Nuclear Science and Engineering,2002,22(3):240-243. |
| |
| Authors: | XIE Heng GAO Zuying |
| |
| Abstract: | A three dimensional numerical model based on PHOENICS 3.3 code using porousmedia method was established to simulate fluid flow in the shell tube heat exchanger. Tubes in the heat exchange were described by means of distributed resistance along with volumetric porosity and surface permeability. The model was validated by comparison of computed pressure drops with the experiments by Halle . And a modified code was used to calculate the fluid flow in the main heat exchanger of the 200 MW nuclear heating reactor(NHR 200). |
| |
| Keywords: | heat exchanger porous media numerical simulation low temperatule district heating reactor |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
