| 基于Moldflow的汽车手套箱框本体注塑模设计 |
| |
| 引用本文： | 苏瞧忠.基于Moldflow的汽车手套箱框本体注塑模设计[J].模具技术,2022(1):9-13. |
| |
| 作者姓名： | 苏瞧忠 |
| |
| 作者单位： | 平江县职业技术学校 |
| |
| 摘 要： | 以某汽车手套箱框本体的注塑模具设计为例，对产品结构及模具结构进行分析，介绍了模具的设计及工作过程，利用Moldflow分析软件在模具开发前期进行模拟分析，确定塑件浇口类型和位置，用推荐公式校核冷却系统、顶出系统，结果表明，模具设计方案合理可行，在实际生产过程中也得到了验证。
|
| 关 键 词： | 浇口 注塑模 Moldflow |
Plastic injection mold design of automobile glove box body based on Moldflow analysis |
| |
| SU Qiaozhong.Plastic injection mold design of automobile glove box body based on Moldflow analysis[J].Die and Mould Technology,2022(1):9-13. |
| |
| Authors: | SU Qiaozhong |
| |
| Abstract: | Taking the injection mold design of an automobile glove box frame as an example,in this paper,the product structure and mold structure of the automobile glove box frame was analyzed and the injection mold design and mold working process of the plastic part were introduced.Moldflow software was used for simulation and analysis in the early stage of mold development,to determine the gate type and position of the plastic part,to check the cooling system and ejection system by using the recommended formulas.The results show that the die design is reasonable and feasible,and has been verified in the actual production process. |
| |
| Keywords: | gate injection mold Moldflow |
| 本文献已被 维普 等数据库收录！ |
