| 杯盖内衬塑料注射模设计 |
| |
| 引用本文： | 屈华昌.杯盖内衬塑料注射模设计[J].模具工业,2002(8):43-45. |
| |
| 作者姓名： | 屈华昌 |
| |
| 作者单位： | 南京工程学院,江苏南京,210013 |
| |
| 摘 要： | 分析了磁化杯盖内衬塑件的工艺特点 ,介绍了适合于该塑件注射成型的特殊模具结构设计 ,同时说明了模具的工作过程。
|
| 关 键 词： | 注射模 侧抽芯机构 斜滑决 |
| 文章编号： | 1001-2168(2002)08-0043-03 |
| 修稿时间： | 2001年10月8日 |
Design of the Injection Mould for the Liner of the Cup Lid |
| |
| QU Hua-chang.Design of the Injection Mould for the Liner of the Cup Lid[J].Die & Mould Industry,2002(8):43-45. |
| |
| Authors: | QU Hua-chang |
| |
| Abstract: | The technological characteristics of the plastic liner of the magnetizing cup lid were analyzed. The design of spectial structure of the injection mould for forming the plastic liner was introduced. The working process of the mould was stated. |
| |
| Keywords: | injection mould side core-pulling mechanism slant sliding block |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
