| 精仪工作台定量调整的原理及方法 |
| |
| 引用本文： | 刘瑞玲.精仪工作台定量调整的原理及方法[J].计测技术,2004,24(2):16-20. |
| |
| 作者姓名： | 刘瑞玲 |
| |
| 作者单位： | 五环(集团)实业有限责任公司,陕西,西安,710038 |
| |
| 摘 要： | 论述了可调结构仪器工作台的结构、调整原理和调整方法，并以三点支撑结构、锥面支撑结构仪器工作台表面与测量轴线垂直度的调整为例，具体地阐述了调整方法和步骤。
|
| 关 键 词： | 工作台 调整 方法 |
| 修稿时间： | 2003/9/17 0:00:00 |
Principle and Method of Quantitative Adjustment of Operating Platform for Accurate Instrument |
| |
| LIU Rui-ling.Principle and Method of Quantitative Adjustment of Operating Platform for Accurate Instrument[J].Metrology & Measurement Technology,2004,24(2):16-20. |
| |
| Authors: | LIU Rui-ling |
| |
| Abstract: | The construction, adjusting principle and method of the adjustable operating platform for the instrument are presented in this paper. Taking the adjustment of the verticality between the measured axle and the platform surface with three-point bearing construction and conical surface bearing construction as an example, the adjusting method and procedure are described. |
| |
| Keywords: | operating platform adjustment method |
| 本文献已被 万方数据 等数据库收录！ |
| 点击此处可从《计测技术》浏览原始摘要信息 |
|
点击此处可从《计测技术》下载全文 |
