| 数控系统加减速控制方法的研究 |
| |
| 引用本文： | 潘敏,邬义杰,冷洪滨.数控系统加减速控制方法的研究[J].制造业自动化,2005,27(9):30-33. |
| |
| 作者姓名： | 潘敏 邬义杰 冷洪滨 |
| |
| 作者单位： | 浙江大学现代制造工程研究所,杭州,310027 |
| |
| 基金项目： | 国家自然科学基金项目（50275134）;浙江省自然科学基金项目资助（Y104243） |
| |
| 摘 要： | 系统的介绍了一种步进电机直线加减速的控制方案,核心内容为如何根据加工线段的剩余长度判断减速区域.此方法大大缩减了加工时间,有效地提高了加工效率,且具有智能控制的特点.该算法已经在自行开发设计的数控系统中应用并得到验证.
|
| 关 键 词： | 步进电机 直线加减速 数控系统 |
| 文章编号： | 1009-0134(2005)09-0030-03 |
| 收稿时间： | 2005-03-08 |
| 修稿时间： | 2005年3月8日 |
Research on accelerating and decelerating control of NC system |
| |
| PAN Min,WU Yi-jie,Leng Hong-bin.Research on accelerating and decelerating control of NC system[J].Manufacturing Automation,2005,27(9):30-33. |
| |
| Authors: | PAN Min WU Yi-jie Leng Hong-bin |
| |
| Abstract: | A control method of linear acceleration and deceleration on step motor was introduced in this paper. The main idea was to judge the deceleration district according to the residual length of the line segment. This method reduced machining time greatly and increased cutting efficiency availably. It also had the characteristic of intelligent control. The method had been applied and confirmed in the NC svstem successfully. |
| |
| Keywords: | step motor linear acceleration and deceleration NC system |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
