| 螺旋锥齿轮的齿面测量及机床加工参数修正 |
| |
| 引用本文： | 王小椿,王军,姜虹,李润方,冯文军. 螺旋锥齿轮的齿面测量及机床加工参数修正[J]. 机械工程学报, 2003, 39(8): 125-128 |
| |
| 作者姓名： | 王小椿 王军 姜虹 李润方 冯文军 |
| |
| 作者单位： | 1. 西安交通大学机械工程学院,西安,710049
2. 重庆大学 |
| |
| 基金项目： | 高等学校实验室访问学者基金 |
| |
| 摘 要： | 给出了Gleason制螺旋锥齿轮的理论齿面模型,用差曲面描述三坐标测量机测量得到的实际齿面到理论齿面的偏差,提出了一种利用差曲面特征参数修正机床调整参数的新方法,有效地提高了齿面几何精度。
|
| 关 键 词： | 螺旋锥齿轮 三坐标测量机 差曲面 机床调整参数修正 |
| 修稿时间： | 2002-05-22 |
TOOTH SURFACE MEASUREMENT AND MACHINE-SETTINGS CORRECTION OF SPIRAL BEVEL GEAR |
| |
| WangXiaochun WangJun Jiang Hong. TOOTH SURFACE MEASUREMENT AND MACHINE-SETTINGS CORRECTION OF SPIRAL BEVEL GEAR[J]. Chinese Journal of Mechanical Engineering, 2003, 39(8): 125-128 |
| |
| Authors: | WangXiaochun WangJun Jiang Hong |
| |
| Affiliation: | WangXiaochun WangJun Jiang Hong(Xi 'an Jiaotong University)Lin Runfang Feng Wenjun(Chongqing University) |
| |
| Abstract: | The Gleason theoretical tooth surface model is presented. The deviations of the real tooth surface measured with coordinate measuring machine from the theoretical one are represented with the difference surface. Using the global parameters derived from the difference surface, an algorithm of machine-settings correction is proposed. The geometrical precision of tooth surface is improved effectively. |
| |
| Keywords: | Spiral bevel gear Coordinate measuring machine Difference surface Machine-settings correction |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
