| 球墨铸铁摩擦副激光熔覆处理层摩擦磨损研究 |
| |
| 引用本文： | 刘安民,汪新衡,匡建新,朱航生. 球墨铸铁摩擦副激光熔覆处理层摩擦磨损研究[J]. 工具技术, 2011, 45(5): 44-46 |
| |
| 作者姓名： | 刘安民 汪新衡 匡建新 朱航生 |
| |
| 作者单位： | 湖南工学院;衡阳丰顺车桥有限公司; |
| |
| 基金项目： | “先进制造技术”产学研合作示范基地资助项目([2008]70); 湖南省普通高校科技成果培育转化资助项目([2009]CY021) |
| |
| 摘 要： | 采用激光熔覆技术在球墨铸铁表面制备了原位析出颗粒增强金属基复合材料表层.以激光强化的球墨铸铁为上试样、灰铸铁为下试样,进行了标准的SRV快速磨损试验.结果表明:熔覆层致密,冶金结合良好,与灰铸铁配副,磨损深度分别为0.84μm、1.79μm,摩擦系数在0.065-0.078内变化,摩擦系数随摩擦时间的增加呈逐渐降低的趋...
|
| 关 键 词： | 激光熔覆 原位析出 球墨铸铁 摩擦系数 摩擦磨损 |
Study on Friction and Wear of Cast Iron Friction Surface Layer by Laser Cladding |
| |
| Liu Anmin,Wang Xinheng,Kuang Jianxin,Zhu Hangsheng. Study on Friction and Wear of Cast Iron Friction Surface Layer by Laser Cladding[J]. Tool Engineering(The Magazine for Cutting & Measuring Engineering), 2011, 45(5): 44-46 |
| |
| Authors: | Liu Anmin Wang Xinheng Kuang Jianxin Zhu Hangsheng |
| |
| Affiliation: | Liu Anmin,Wang Xinheng,Kuang Jianxin,Zhu Hangsheng Doctor,Professor,Dept.of Mechanical Engineering,Hu'nan Institute of Technology,Hengyang,Hunan 421002,China |
| |
| Abstract: | The situ precipitation particle reinforced metal matrix composite clad layer was fabricated on ductile iron surface by laser cladding using replaced FeC-SiB alloy powders.The optimal SRV tests were carried out by using laser clad layers as upper samples and grey cast iron as low samples.The tests show that the clad layer is dense,metallurgical bond is fine.The wear depth is 0.84μm,1.79μm and friction coefficient is 0.065-0.078 when it is composed of friction with gray cast iron.The friction coefficient is decreased with the increase of wear time,that show they have good wear resistance and pair combination. |
| |
| Keywords: | laser cladding situ precipitation ductile iron friction coefficient friction and wear |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
