| X6325 T摇臂铣床机械安全极限值的计算与应用 |
| |
| 引用本文： | 赵建杰. X6325 T摇臂铣床机械安全极限值的计算与应用[J]. 机械制造与自动化, 2014, 0(4): 66-67 |
| |
| 作者姓名： | 赵建杰 |
| |
| 作者单位： | 南通科技投资集团股份有限公司,江苏南通226011 |
| |
| 摘 要： | 结合X6325T万能摇臂铣床的切削试验和客户反馈问题，对主轴套筒和工作台横向、纵向进给安全离合器安全极限值进行了分析和计算。在端铣刀铣削时，调节主轴套筒安全离合器上弹簧的压力值，当切削力大于该压力时，安全离合器脱开；在圆柱铣刀铣削时，调节横向、纵向进给安全离合器上弹簧的压力值，当切削主分力大于该值时，安全离合器脱开，进给停止，确保操作者的安全。
|
| 关 键 词： | 切削试验 机械安全 安全极限值 |
Caculation And Application Of Mechanical Safety Ultimate Value For Radial Milling Machine X6325T |
| |
| ZHAO Jian-jie. Caculation And Application Of Mechanical Safety Ultimate Value For Radial Milling Machine X6325T[J]. Machine Building & Automation, 2014, 0(4): 66-67 |
| |
| Authors: | ZHAO Jian-jie |
| |
| Affiliation: | ZHAO Jian-jie ( Nantong Technology Investment Group co., Ltd., Nantong 226011, China) |
| |
| Abstract: | The artical analyzes and calculates the safety ultimate value of spindle quil and table cross,longitudinal clutches,combining the cutting test and customer feedback of radial mil ing machine X6325T. In the trimmer trimming,the spring pressure value on the safety clutch of the spindle socket is adjusted and when cutting pressure is higher than the pressure,the clutch is disengaged;in the cylindrical cutter trimming,the spring pressure value on the safety clutch of lateral and longitudinal feeder is adjusted,when the cutting force is greater than this value,the safety clutch is disengaged,and stopped to ensure the operator safety. |
| |
| Keywords: | cutting test mechanical safety safety ultimate value |
| 本文献已被 维普 等数据库收录！ |
|
