| 基于Moldflow软件的流动方案分析 |
| |
| 引用本文： | 张晓陆. 基于Moldflow软件的流动方案分析[J]. 模具工业, 2006, 32(6): 1-5 |
| |
| 作者姓名： | 张晓陆 |
| |
| 作者单位： | 江苏春兰机械制造有限公司,江苏,泰州,225300 |
| |
| 摘 要： | 以壁挂式空调器面板流动分析为例,介绍了Moldflow软件的作用,通过应用MPI5.0软件对2种CAE流动方案进行了填充对比分析,得到了一种切实可行的方案,充分展现了CAE技术在浇注系统设计和注射模开发过程中所起的突出作用。
|
| 关 键 词： | Moldflow软件 注射模 浇口 工艺 模具开发 |
| 文章编号： | 1001-2168(2006)06-0001-05 |
| 收稿时间： | 2005-12-10 |
| 修稿时间： | 2005-12-10 |
Moldflow-based analysis of plastics flowing scheme |
| |
| ZHANG Xiao-lu. Moldflow-based analysis of plastics flowing scheme[J]. Die & Mould Industry, 2006, 32(6): 1-5 |
| |
| Authors: | ZHANG Xiao-lu |
| |
| Affiliation: | Jiangsu Chunlan Machine Manufacturing Co., Ltd, Taizhou, Jiangsu 225300, China |
| |
| Abstract: | Moldflow software was used to analyze plastics flowing status during the forming of wall hanging air-conditioner front panel. Comparison and analysis was made between two CAE plastics feeding schemes by applying MPI 5.0 software and a feasible plan was obtained. It fully reveals the outstanding effect of CAE technology in design of feeding system and development of injection mould. |
| |
| Keywords: | Moldflow software injection mould gate technique development of mould |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
