| 运用预应力组合凹模的拉伸模设计 |
| |
| 引用本文： | 冯小康.运用预应力组合凹模的拉伸模设计[J].模具工业,2003(4):25-26. |
| |
| 作者姓名： | 冯小康 |
| |
| 作者单位： | 南华大学,湖南衡阳,421001 |
| |
| 摘 要： | 介绍了在工件料厚变化较大的拉伸模中采用预应力组合凹模的设计方法 ,在实际生产中应用取得了良好的效果
|
| 关 键 词： | 拉伸模 预应力组合凹模 强力压合 |
| 文章编号： | 1001-2168(2003)04-0025-02 |
| 修稿时间： | 2002年9月5日 |
Design of the Drawing Die with Combined Pre-stressing Matrix |
| |
| FENG Xiao_kang.Design of the Drawing Die with Combined Pre-stressing Matrix[J].Die & Mould Industry,2003(4):25-26. |
| |
| Authors: | FENG Xiao_kang |
| |
| Abstract: | The design method of using combined pre_stressing matrix in the drawing die for forming the part with various thickness dimensions was introduced.This method produced a good result in practical production. |
| |
| Keywords: | drawing die combined pre_stressing matrix pressing close with strong force |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
