|
|||||
|
|
| 热轧生产工艺对C70250合金力学性能和导电性能的影响 | |
| 引用本文： | 李华清,汤玉琼,汪明朴.热轧生产工艺对C70250合金力学性能和导电性能的影响[J].中国有色金属学报,2010,20(1). |
| 作者姓名： | 李华清 汤玉琼 汪明朴 |
| 作者单位： | 1. 苏州有色金属研究院,苏州,215026;中南大学,材料科学与工程学院,长沙,410083 2. 苏州有色金属研究院,苏州,215026 3. 中南大学,材料科学与工程学院,长沙,410083 |
| 基金项目： | 中国铝业公司科技发展基金资助项目 |
| 摘 要： | 在模拟工业化生产条件下研究C70250合金的热轧、固溶及时效处理工艺,对比C70250合金板坯的热轧、热轧+时效、热轧+冷轧+时效后合金的力学性能与导电性能,同时研究空冷与水冷对材料力学性能的影响.结果表明:时效析出为C70250合金的主要强化手段,时效前的塑性加工能使合金强度提高4%～5%.XRD分析表明:C70250合金铸锭经热轧开坯,在575～725 ℃之间保温1 h,析出相以Ni_2Si为主;合金开轧与终轧温度应控制在(900±50)～725 ℃之间,热轧板冷却速度不小于2.5 ℃/s;固溶处理制度为(900±50) ℃、1～3 h;时效工艺为400～ 450 ℃、4～6 h,该工艺制备的C70250合金抗拉强度不小于644 MPa,电导率IACS为40%,伸长率为8%. |
| 关 键 词： | C70250合金 热轧 时效 |
Effects of hot rolling process on mechanical and electrical properties of C70250 alloy |
|
| LI Hua-qing,TANG Yu-qiong,WANG Ming-pu.Effects of hot rolling process on mechanical and electrical properties of C70250 alloy[J].The Chinese Journal of Nonferrous Metals,2010,20(1). | |
| Authors: | LI Hua-qing TANG Yu-qiong WANG Ming-pu |
| Affiliation: | LI Hua-qing1,2,TANG Yu-qiong1,WANG Ming-pu2 (1.Suzhou Institute for Nonferrous Metals,Suzhou 215026,China,2.School of Materials Science , Engineering,Central South University,Changsha 410083,China) |
| Abstract: | Hot rolling,solid solution and ageing treatment of C70250 alloy were investigated by mimicking the commercial process.The mechanical and electrical properties of C70250 alloy were analyzed under hot rolling state,aging after hot rolling and aging after cold rolling following hot rolling.The effects of quenching and cooling by radiation on the mechanical properties were also investigated.The results show that aging precipitation is the primary strengthening method for the C70250 alloy.The plastic working pri... |
| Keywords: | C70250 alloy hot rolling aging |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |