| 凿岩钎头壳体温挤压精密成形力能分析 |
| |
| 引用本文： | 赵军,李洪波,曹宏强,马进.凿岩钎头壳体温挤压精密成形力能分析[J].钢铁,2005,40(11):53-56,83. |
| |
| 作者姓名： | 赵军 李洪波 曹宏强 马进 |
| |
| 作者单位： | 1. 燕山大学锻压研究所,河北,秦皇岛,066004
2. 燕大恒远高科技有限公司,河北,秦皇岛,066000 |
| |
| 基金项目： | 国家火炬计划项目（99D231D6200067） |
| |
| 摘 要： | 采用钎头壳体温挤压精密成形专利技术生产了小型凿岩钎头。从分析钎头壳体温挤压成形特点入手，将非轴对称正反复合挤压问题转化为轴对称锥孔反挤问题，再通过曲线的平移和拉伸变换，推导出钎头壳体温挤压力和变形功的近似计算公式，从理论上确定了挤压力的主要影响因素及其变化规律，为该项新工艺的模具设计和设备选择提供了理论依据。
|
| 关 键 词： | 钎头壳体 温挤压 挤压力 变形功 |
| 文章编号： | 0449-749X（2005）11-0053-04 |
| 修稿时间： | 2005-01-06 |
Analysis of Warm Extruding Power for Rock Drill |
| |
| ZHAO Jun,LI Hong-bo,CAO Hong-qiang,MA Jin.Analysis of Warm Extruding Power for Rock Drill[J].Iron & Steel,2005,40(11):53-56,83. |
| |
| Authors: | ZHAO Jun LI Hong-bo CAO Hong-qiang MA Jin |
| |
| Abstract: | Mini rock drill has been produced based on patented technology for rock drill warm extrusion. By analyzing the characteristics of rock drill warm extrusion, the non--axisymmetric forward and backward compound extrusion can be changed into the axisymmetric conical punch backward extrusion. And by parallel move and elongation of the curve, the approximate calculation formulas of extruding power and forming energy are deduced. In theory, the main factors affecting on extruding power are determined. The results can be used as basis to design tools and choose proper equipment for this new technology. |
| |
| Keywords: | rock drill warm extrusion extruding power forming energy |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
