首页 | 本学科首页   官方微博 | 高级检索  
     

考虑ARMA风速模型半直驱风电行星齿轮传动系统动力学分析
引用本文:程言丽,肖正明,张威.考虑ARMA风速模型半直驱风电行星齿轮传动系统动力学分析[J].机械与电子,2015,0(6):30-33.
作者姓名:程言丽  肖正明  张威
作者单位:(昆明理工大学机电工程学院,云南 昆明 650500)
基金项目:云南省自然科学基金项目(2013FB014);云南省教育厅重点项目(2013Z124);高校人才启动基金
摘    要:针对半直驱风电行星齿轮系统的变速变载的特点,考虑风速变化引起的外部载荷激励,采用自回归-滑动平均(ARMA)方法建立模拟风速模型,在考虑时变啮合刚度、啮合阻尼等因素的基础上,采用集中参数法建立了行星齿轮传动系统平移-扭转耦合动力学模型。并采用四阶龙格-库塔法,求解1.5 MW半直驱风力发电行星齿轮传动系统的动态响应。

关 键 词:半直驱风电  行星齿轮动力学  集中参数法  动态响应  ARMA风速模型

Dynamic Analysis Considering Planetary Gears of Semi direct Drive Wind Turbines Using the ARMA Windspeed Model
CHENG Yanli,XIAO Zhengming,ZHANG Wei.Dynamic Analysis Considering Planetary Gears of Semi direct Drive Wind Turbines Using the ARMA Windspeed Model[J].Machinery & Electronics,2015,0(6):30-33.
Authors:CHENG Yanli  XIAO Zhengming  ZHANG Wei
Affiliation:(Faculty of Mechanical and Electrical Engineering, Kunming University of Science and Technology, Kunming 650500,China)
Abstract:Due to the variable speed and variable load characteristics of semi-direct drive wine turbines, external load excitation caused by variable speed is considered and a simulated wind speed model is set up using the Auto-Regressive and Moving Average Model(ARMA). A translational-rotational coupling dynamic model of the planetary gears transmission system is established using the lumped-parameter method, which considers the time-varying mesh stiffness and mesh damping. The Runge-Kutta method is used to derive the vibration dynamic response to the 1.5 MW semi-direct drive wind turbine system and according which the vibration performance is analyzed.
Keywords:semi direct drive wind power  planetary gears dynamics  lumped parameter method  dynamic response  ARMA speed model
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《机械与电子》浏览原始摘要信息
点击此处可从《机械与电子》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号