|
|||||
|
|
| 镁合金铸轧凝固层焊合点控制及工艺优化 | |
| 引用本文： | 翁文凭,邓康,任忠鸣,陈琦,迟之东,赵奇特.镁合金铸轧凝固层焊合点控制及工艺优化[J].中国有色金属学报,2011,21(6). |
| 作者姓名： | 翁文凭 邓康 任忠鸣 陈琦 迟之东 赵奇特 |
| 作者单位： | 1. 上海大学材料科学与工程学院,上海200072;苏州有色金属研究院有限公司材料工艺研究所,苏州215026 2. 上海大学材料科学与工程学院,上海,200072 3. 苏州有色金属研究院有限公司材料工艺研究所,苏州,215026 |
| 基金项目： | 江苏省自然科学基金资助项目，中色科技股份有限公司科技发展计划基金 |
| 摘 要： | 结合镁合金铸轧工艺特点,分析镁合金板坯铸轧过程中凝固层焊合点位置与板坯缺陷的影响规律；针对板坯厚度、铸轧区长度及铸轧速度等关键参数,简化凝壳径向生长及凝固前沿周向转动过程,确定铸轧速度匹配范围,建立凝固层焊合点位置控制模型,并通过工艺试验对控制模型进行验证.结果表明通过理论模型确定工艺匹配范围,可稳定并优化镁合金铸轧工艺,大幅度降低铸轧板坯宏观缺陷,获得表面光洁、质量良好的镁合金铸轧板坯. |
| 关 键 词： | 镁合金 双辊铸轧 凝固层焊合点 控制模型 工艺优化 |
Kiss-point of solidification layer position control and process optimization for magnesium alloys twin-roll casting |
|
| WENG Wen-ping,DENG Kang,REN Zhong-ming,CHEN Qi,CHI Zhi-dong,ZHAO Qi-te.Kiss-point of solidification layer position control and process optimization for magnesium alloys twin-roll casting[J].The Chinese Journal of Nonferrous Metals,2011,21(6). | |
| Authors: | WENG Wen-ping DENG Kang REN Zhong-ming CHEN Qi CHI Zhi-dong ZHAO Qi-te |
| Affiliation: | WENG Wen-ping1,2,DENG Kang1,REN Zhong-ming1,CHEN Qi2,CHI Zhi-dong2,ZHAO Qi-te2 (1.School of Materials Science and Engineering,Shanghai University,Shanghai 200072,China,2.Department of Materials Science and Technology,Suzhou Nonferrous Metals Research Institute,Suzhou 215026,China) |
| Abstract: | The effect of kiss-point position of solidification layer of twin-roll casting on macro-defects of magnesium alloys strip was analyzed through experiments and theoretical derivation.A kiss-point model which considers the strip thickness,set-back length and roll speed was established to optimize the process and enhance the surface quality of magnesium alloys strip.The results show that the model of kiss-point of solidification layer effectively stabilizes and optimizes the twin-roll casting processing,and th... |
| Keywords: | magnesium alloys twin-roll casting kiss-point of solidification layer model process optimization |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |