| 不同造粒方式对颗粒梗产品质量的影响 |
| |
| 引用本文： | 资文华,刘坚,王保兴,吴晓华,李军.不同造粒方式对颗粒梗产品质量的影响[J].中国烟草学报,2011,17(3):23-28. |
| |
| 作者姓名： | 资文华 刘坚 王保兴 吴晓华 李军 |
| |
| 作者单位： | 1. 昆明理工大学冶金与能源工程学院,昆明市一二.一大街文昌路68号 650093;云南瑞升烟草技术(集团)有限公司,昆明市高新区海源北路1699号 650106
2. 云南瑞升烟草技术(集团)有限公司,昆明市高新区海源北路1699号,650106 |
| |
| 基金项目： | 云南省科技厅资助项目“烟草离线加工相关技术产业化应用研究” |
| |
| 摘 要： | 为评价不同造粒方式对烟用颗粒梗产品质量的影响,采用锤片式、剪切式和R型造粒设备进行了微波膨胀烟梗造粒试验,并对造粒过程中的物料损耗率和得率、生产能力和耗电量、成品物理特性和感官质量进行了系统对比分析.结果表明:不同造粒方式对生产过程的物料损耗率、生产能力、耗电量、合格颗粒得率及成品填充值的影响较大(P＜0.01),但对...
|
| 关 键 词： | 颗粒梗 造粒方法 填充值 得率 感官质量 |
Effects of different granulation methods on stem granule quality |
| |
| ZI Wen-hua,LIU Jian,WANG Bao-xing,WU Xiao-hua,LI Jun.Effects of different granulation methods on stem granule quality[J].Acta Tabacaria Sinica,2011,17(3):23-28. |
| |
| Authors: | ZI Wen-hua LIU Jian WANG Bao-xing WU Xiao-hua LI Jun |
| |
| Affiliation: | ZI Wen-hua1,2,LIU Jian2,WANG Bao-xing2,WU Xiao-hua2,LI Jun1,21 School of Metallurgical and Energy engineering,Kunming University of Science and Technology,Kunming 650093,China,2 Yunnan Reascend Tobacco Technology(Group) Co.Ltd,Kunming 650106 |
| |
| Abstract: | Granulation of microwave expanded stems was studied with hammer,cut and R-type granulation to evaluate effects of different granulation methods on stem granule quality.Material loss rate,granulation yield,throughput,power consumption,physical characteristics and sensory quality of stem granules were analyzed.Results showed that different granulation methods had significant effect on material loss rate,granulation yield,throughput,power consumption and filling value of products during processing(P<0.01).Howe... |
| |
| Keywords: | stem granule granulation method filling power yield sensory quality |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
