| 基于胶印输墨系统结构的油墨传递路线建模 |
| |
| 引用本文： | 康建山,初红艳,蔡力钢. 基于胶印输墨系统结构的油墨传递路线建模[J]. 包装工程, 2010, 31(3): 75-78 |
| |
| 作者姓名： | 康建山 初红艳 蔡力钢 |
| |
| 作者单位： | 北京工业大学,北京市先进制造技术重点实验室,北京,100124;北京工业大学,北京市先进制造技术重点实验室,北京,100124;北京工业大学,北京市先进制造技术重点实验室,北京,100124 |
| |
| 基金项目： | 北京市教委科研计划项目(KM200910005006) |
| |
| 摘 要： | 通过向输墨系统建模模块输入墨辊信息,建立了墨辊、接触点和墨辊墨区的数学模型,并得到输墨系统的结构;提出利用图论APSP知识解决下墨路径长度问题,并利用floyd算法求得各接触点下墨路径长度;根据传递路线的长度,得到输墨系统的油墨传递路线。以便于对输墨系统性能进行快速有效分析和墨路的设计。
|
| 关 键 词： | 输墨系统 传递路线 油墨传递顺序 |
Modeling of Ink Transfer Path Based on Inking System Structure |
| |
| KANG Jian-shan,CHU Hong-yan,CAI Li-gang. Modeling of Ink Transfer Path Based on Inking System Structure[J]. Packaging Engineering, 2010, 31(3): 75-78 |
| |
| Authors: | KANG Jian-shan CHU Hong-yan CAI Li-gang |
| |
| Affiliation: | The Key Laboratory of Advanced Manufacturing Technology of Beijing Municipality;Beijing University of Technology;Beijing 100124;China |
| |
| Abstract: | The mathematic model of the rollers,touching point and the ink section of roller was established according to the rollers information inputted via the modeling module,and the configuration of the inking system was obtained.The idea to solve the transfer path of printing ink using the knowledge of graph theory,and the floyd arithmetic was used to solve the length of every touching point's ink flow route.The transfer path of ink was determined according to the length of route.The method can be used to analyze... |
| |
| Keywords: | inking system transfer path ink transfer sequence |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
