Abstract: | The Taguchi method was used to obtain the optimum electrodeposition parameters for the synthesis of the CuInSe2 thinfilm for solar cells.The parameters consist of annealing temperature,current density,CuCl2 concentration,FeCl3 concentration,H2SeO3 concentration,TEA amount,pH value,and deposition time.The experiments were carried out according to an L18(2137) table.An X-ray diffractometer (XRD) and a scanning electron microscope (SEM) were respectively used to analyze the phases and observe the microstructure and the grain size of the CuInSe2 film before and after annealing treatment.The results showed that the CuInSe2phase was deposited with a preferred plane (112) parallel to the substrate surface.The optimum parameters are as follows:currentdensity,7 mA/cm2;CuCl2 concentration,10 raM;FeCl3 concentration,50 raM;H2SeO3 concentration,15 mM;TEA amount,0 mL;pH value,1.65;deposition time,10 min;and annealing temperature,500℃. |