首页 | 本学科首页   官方微博 | 高级检索  
     

乌江银盘船闸输水系统选型研究
引用本文:陈明栋,杨忠超,杨斌.乌江银盘船闸输水系统选型研究[J].土木与环境工程学报,2006,28(5):30-34.
作者姓名:陈明栋  杨忠超  杨斌
作者单位:重庆交通大学,河海学院,重庆,400074
基金项目:交通部西部交通建设资助项目
摘    要:银盘船闸设计最大工作水头36.5 m,是目前国内单级水头最高的船闸。为简化过大水头带来的阀门水力学问题,提出了带调节水池和带省水池的船闸方案。通过对三种输水系统型式进行分析比较,结果表明,推荐的省水船闸方案不仅能满足设计和相关使用要求,还可将阀门工作水头减少一半,且船舶过一次闸可节省水量48.6%。

关 键 词:高水头船闸  输水系统  选型
文章编号:1006-7329(2006)05-0030-05
收稿时间:2006-05-15
修稿时间:2006年5月15日

Studies on the Type Selection of the Filling and Emptying System of Yingpan Lock on Wujiang River
CHEN Ming - dong,YANG Zhong - chao,YANG - Bin.Studies on the Type Selection of the Filling and Emptying System of Yingpan Lock on Wujiang River[J].Journal of Civil and Environmental Engineering,2006,28(5):30-34.
Authors:CHEN Ming - dong  YANG Zhong - chao  YANG - Bin
Affiliation:School of River and Ocean Engineering, Chongqing Jiaotong University, Chongqing 400074, China
Abstract:Yingpan lock is the highest single level lock at present in China with a working head of 36.5m.This paper presents a regulation tank lock scheme and the water saving lock scheme to settle the valve hydraulics problem caused by high water head.By analyzing and comparing of the general single level lock,the regulation tank lock and the water saving lock,it is concluded that not only the recommended water saving lock can satisfy the design and the correlated operation requirements,reduce the valve work head by a half to simplify value hydraulics problem,but the water saving is possible at least by 48.6% in one ship passage through the lock.
Keywords:high-head lock  filling and emptying system  type selection
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《土木与环境工程学报》浏览原始摘要信息
点击此处可从《土木与环境工程学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号