| 体内张拉成形空间网格结构试验模型成形过程分析 |
| |
| 引用本文： | 王磊,张毅刚,张其林.体内张拉成形空间网格结构试验模型成形过程分析[J].工业建筑,2009(Z1). |
| |
| 作者姓名： | 王磊 张毅刚 张其林 |
| |
| 作者单位： | 同济大学建筑工程系;北京工业大学空间结构研究中心; |
| |
| 摘 要： | 体内张拉成形空间网格结构是通过几何大变形成形的预应力钢结构,施工时张拉下弦索使上弦梁拱起成形,结构成形后下弦完全水平。针对一个典型的体内张拉成形空间网格结构试验模型,分次分批施加预应力使结构成形,详细研究成形过程中结构上弦单元的变形及受力特点,分析不同批次张拉单元之间的相互影响,探索体内张拉成形空间网格结构的成形机理。研究结果表明,上弦是结构的主要受力构件,成形过程中结构不同位置上弦弯矩和轴力的变化规律不同。
|
| 关 键 词： | 体内张拉 预应力 成形分析 |
FORMING ANALYSIS OF MODEL FOR INTERNAL STRETCH-DRAW SPACE LATTICE STRUCTURE |
| |
| Wang Lei Zhang Qilin Zhang Yigang.FORMING ANALYSIS OF MODEL FOR INTERNAL STRETCH-DRAW SPACE LATTICE STRUCTURE[J].Industrial Construction,2009(Z1). |
| |
| Authors: | Wang Lei Zhang Qilin Zhang Yigang |
| |
| Affiliation: | 1.Department of Structural Engineering;Tongji University;Shanghai 200092;China;2.Spatial Structures Research Center;Beijing University of Technology;Beijing 100124;China |
| |
| Abstract: | The internal stretch-draw space lattice structure is a kind of pre-stressed steel structure forming with big geometrical deformation.The structure is erected by cable in the lower chord while top beam is rising and arching.Finally the lower chord is horizontal after forming the structure.A typical model of this structure is designed.The pre-stress are applied to whole structure step by step during the forming process.A series of important problems are studied including deformation characteristics and mechan... |
| |
| Keywords: | internal stretching pre-stress forming analysis |
| 本文献已被 CNKI 等数据库收录！ |
