| 曲轴TR锻造三维CAD／CAPP系统开发 |
| |
| 引用本文： | 覃兴,董湘怀,张晓玉. 曲轴TR锻造三维CAD／CAPP系统开发[J]. 模具技术, 2008, 0(1): 51-53,57 |
| |
| 作者姓名： | 覃兴 董湘怀 张晓玉 |
| |
| 作者单位： | 上海交通大学,模具CAD国家工程研究中心,上海,200030 |
| |
| 摘 要： | 针对曲轴TR锻造装置开发了一套CAD／CAPP系统。该系统能进行曲轴锻造工艺分析和锻模设计。系统以Visual Basic为开发工具，Solidworks为平台实现锻造工艺和模具的三维设计，CAD图纸输出，TR装置参数计算等功能，大大减少了曲轴锻造工艺设计阶段开发时间，提高了设计质量
|
| 关 键 词： | TR 曲轴锻造 CAD/CAPP |
| 文章编号： | 1001-4934（2008）01-0051-03 |
| 收稿时间： | 2007-11-29 |
| 修稿时间： | 2007-11-29 |
Development of three-dimensional CAD/CAPP system for crank shaft TR forging device |
| |
| QIN Xing,DONG Xiang-huai,ZHANG Xiao-yu. Development of three-dimensional CAD/CAPP system for crank shaft TR forging device[J]. Die and Mould Technology, 2008, 0(1): 51-53,57 |
| |
| Authors: | QIN Xing DONG Xiang-huai ZHANG Xiao-yu |
| |
| Abstract: | A CAD/CAPP system was developed for the crankshaft TR forging device. The analysis of the crankshaft forging process and the design of the forging die could be conducted in the system. The system was developed by Visual Basic on the platform of Solidwork. It has realized some functions as three-dimensional design for forging process and die structure, CAD drawing output, and parameter calculation for TR device. It could greatly shorten the develop time of forging process for crankshaft, and enhance the quality of design. |
| |
| Keywords: | TR crankshaft forging CAD/CAPP |
| 本文献已被 维普 万方数据 等数据库收录！ |
