| 薄板坯连铸连轧流程Fe-3％Si钢冷轧板织构 |
| |
| 引用本文： | 李长生,杨华,王艳芳,于永梅. 薄板坯连铸连轧流程Fe-3％Si钢冷轧板织构[J]. 河南冶金, 2010, 18(1): 14-17,46 |
| |
| 作者姓名： | 李长生 杨华 王艳芳 于永梅 |
| |
| 作者单位： | 1. 东北大学,轧制技术及连轧自动化国家重点实验室
2. 河北省首钢迁安钢铁有限责任公司 |
| |
| 基金项目： | 国家自然科学基金重点项目(50534020)资助项目 |
| |
| 摘 要： | 在实验室按照薄板坯连铸连轧工艺流程试制了Fe-3％Si硅钢热轧板，按照四种冷轧变形制度将热轧板冷轧后采用X射线衍射方法观察了织构分布，分析了14／16层、H／8层、H／4层、H／2层的取向密度变化，研究了热轧和冷轧过程的织构演变规律。试验研究结果为开发薄板坯连铸连轧短流程生产电工钢技术提供理论依据和参考数据。
|
| 关 键 词： | 硅钢 织构 热轧 冷轧 薄板坯 连铸连轧 |
THE TEXTURE OF COLD ROLLED STRIP OF Fe-3% Si STEEL PRODUCED BY THIN SLAB CASTING AND ROLLING |
| |
| Li Changsheng,Yang Hua,Wang Yanfang,Yu Yongmei. THE TEXTURE OF COLD ROLLED STRIP OF Fe-3% Si STEEL PRODUCED BY THIN SLAB CASTING AND ROLLING[J]. Henan Metallurgy, 2010, 18(1): 14-17,46 |
| |
| Authors: | Li Changsheng Yang Hua Wang Yanfang Yu Yongmei |
| |
| Affiliation: | 1.State Key Lab of Rolling and Automation;Northeastern University;2.Hebei Shougang Qianan Iron and Steel Corporation |
| |
| Abstract: | The hot rolled strip of Fe-3%Si steel was experimental produced by thin slab casting and rolling(TSCR) process in the laboratory.The texture distribution of cold rolled strip according to four kinds of cold rolling reduction schedule were observed through X-ray diffraction method,orientation density variation of H/16 layer,H/8 layer,H/4 layer,H/2 layer were analyzed,texture evolution rule was researched during hot rolling and cold rolling.The research works were useful theoretical basis and reference data t... |
| |
| Keywords: | Silicon steel texture hot rolling cold rolling thin Slab Continuous casting and direct rolling |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
