| Pro/ENGINEER环境下的实体造型与装配设计 |
| |
| 引用本文： | 刘海芳.Pro/ENGINEER环境下的实体造型与装配设计[J].机械设计与制造,2004(2):27-28. |
| |
| 作者姓名： | 刘海芳 |
| |
| 作者单位： | 哈尔滨工业大学汽车工程学院,威海,264209 |
| |
| 摘 要： | 介绍了基于Pro／ENGINEER的三维实体造型及装配技术的造型步骤及基本方法，强调了三维实体造型是参数化设计的基础，可以为设计人员提供生动直观的视觉感受。
|
| 关 键 词： | Pro/ENGINEER 三维空间 实体造型 装配设计 |
| 文章编号： | 1001-3997(2004)02-0027-02 |
| 修稿时间： | 2003年10月20 |
Solid modeling and assembly design in Pro/ENGINEER's environment |
| |
| LIU Hai,fang.Solid modeling and assembly design in Pro/ENGINEER's environment[J].Machinery Design & Manufacture,2004(2):27-28. |
| |
| Authors: | LIU Hai fang |
| |
| Abstract: | Some steps and basic methods about three- dimensional solid modeling based on Pro/ENGINEER are introduced..It is emphasized that the three- dimensional solid design is the foundation of parametric design,and the lively visual impression can be available for the designer. |
| |
| Keywords: | Pro/ENGINEER Three- dimensional space Solid modeling Assembly |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
