首页 | 本学科首页   官方微博 | 高级检索  
     

基于FPGA和DDS技术的信号发生器设计
引用本文:李平,周原.基于FPGA和DDS技术的信号发生器设计[J].国外电子元器件,2014(10):71-74.
作者姓名:李平  周原
作者单位:黄淮学院信息工程学院,河南驻马店264001
基金项目:基金项目:国家自然科学基金青年基金项目(61304172)
摘    要:分析了DDS技术的基本原理和基本结构,介绍了一种基于FPGA的DDS信号发生器设计方法。以FPGA芯片EP2C35F672C8为核心器件,辅以必要的模拟电路,在Quartus II9.0平台下实现系统设计的综合与仿真。实验测试表明该信号发生器输出的波形具有平滑、稳定度高和相位连续等优点,具有一定的工程实践意义。

关 键 词:直接数字频率合成(DDS)  信号发生器  现场可编程门阵列(FPGA)

Design of signal generator based on FPGA and DDS technology
LI Ping,ZHOU Yuan.Design of signal generator based on FPGA and DDS technology[J].International Electronic Elements,2014(10):71-74.
Authors:LI Ping  ZHOU Yuan
Affiliation:(College of Information Engineering Huanghuai University, Zhumadian 264001, China)
Abstract:The basic principle and the basic structure of DDS technology are analyzed in this paper, which introduces a design method of DDS signal generator based on FPGA. The FPGA chip EP2C35F672C8 is used as the core cell, supplemented by necessary analog circuit. In the Quartus II9.0 platform,synthesis and simulation of the system design is realized. The experiment test shows that the output waveform of the signal generator has the advantages of smooth, high stability and phase continuous, etc. It has a certain engineering practice significance.
Keywords:Direct Digital frequency Synthesis (DDS)  signal generator  Field Programmable Gate Array (FPGA)
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号